- Back to overview
-
-
Product 9 of 27
-
iSy® CAM Titanium blank, type ME, Ø 12, for implant Ø 3.8 / 4.4 / 5.0, L 20, (10 units) incl. abutment screw
iSy® CAM titanium blank, type ME, incl. separately packaged iSy® abutment screw, material: titanium alloy
| CAM blanks | |
| tightening torque | 20 Ncm |
| Thread | M1.8 |
| Diameter | 12.0 |
| Connection type | conical |
| Directly screw-retained bridges | No |
| Fixation of the tertiary care | cemented |
| Impression level | implant level |
| Sterility | non-sterile |
| Frequency of use | single-use |
Note:
The blanks enable laboratories to manufacture customised one-piece abutments and healing caps made of titanium alloy on their own milling machines. For the milling process, the CAM titanium blank, type ME is fixated with the front-facing groove of its cylindrical section via a milling holder for PreFace® abutments from Medentika®. These holders are available for selected machines from the respective machine manufacturer. The CAM titanium blanks require product-specific CAM libraries. If you have any questions about compatibility, please contact DEDICAM® Technical Service at +49 7044 9445-800 or dedicam.cad@camlog.com. Ten separately packed iSy® abutment screws (article code: P4005.1614) are supplied. The associated CAD libraries are available as downloads from the Media Center on the Camlog® website.
The blanks enable laboratories to manufacture customised one-piece abutments and healing caps made of titanium alloy on their own milling machines. For the milling process, the CAM titanium blank, type ME is fixated with the front-facing groove of its cylindrical section via a milling holder for PreFace® abutments from Medentika®. These holders are available for selected machines from the respective machine manufacturer. The CAM titanium blanks require product-specific CAM libraries. If you have any questions about compatibility, please contact DEDICAM® Technical Service at +49 7044 9445-800 or dedicam.cad@camlog.com. Ten separately packed iSy® abutment screws (article code: P4005.1614) are supplied. The associated CAD libraries are available as downloads from the Media Center on the Camlog® website.