- Back to overview
-
-
Product 8 of 27
-
iSy® CAM Titanium blank, type AG, Ø 12, implant Ø 3.8/4.4/5.0, L 27 (2 units)
P2471.5027
P2471.5027
iSy® CAM Titanium blank, type AG, for "Ceramill®" CAD/CAM system of Amann Girrbach®, material: titanium alloy
| CAM blanks | |
| tightening torque | 20 Ncm |
| Thread | M1.8 |
| Diameter | 12.0 |
| Connection type | conical |
| Directly screw-retained bridges | No |
| Fixation of the tertiary care | cemented |
| Impression level | implant level |
| Sterility | non-sterile |
| Frequency of use | single-use |
Note:
The CAM titanium blanks, type AG were jointly developed by CAMLOG Biotechnologies GmbH and Amann Girrbach AG. They have the Amann Girrbach® patented connection geometry for the blank holder and are compatible with the Ceramill® CAD/CAM system. The blanks enable laboratories to manufacture customised one-piece abutments and healing caps made of titanium alloy on their own milling machines. The corresponding iSy® Abutment screws (article code: P4005.1614) must be ordered separately. The associated CAD libraries are available as downloads both from the Media Center on the Camlog® website and from Amann Girrbach® via the AG.live portal or via the Software Manager.
The CAM titanium blanks, type AG were jointly developed by CAMLOG Biotechnologies GmbH and Amann Girrbach AG. They have the Amann Girrbach® patented connection geometry for the blank holder and are compatible with the Ceramill® CAD/CAM system. The blanks enable laboratories to manufacture customised one-piece abutments and healing caps made of titanium alloy on their own milling machines. The corresponding iSy® Abutment screws (article code: P4005.1614) must be ordered separately. The associated CAD libraries are available as downloads both from the Media Center on the Camlog® website and from Amann Girrbach® via the AG.live portal or via the Software Manager.