- Back to overview
-
-
Product 18 of 27
-
iSy® CAM CoCr blank, type ME, Ø 12, implant Ø 3.8 / 4.4 / 5.0, L 20 (2 units)

iSy® CAM CoCr blank, type ME, material: CoCr alloy
CAM blanks | |
tightening torque | 20 Ncm |
Platform Switching | No |
Thread | M1.8 |
Diameter | 12.0 |
Height | 20.0 |
Connection type | conical |
Directly screw-retained bridges | No |
Fixation of the tertiary care | cemented |
Impression level | implant level |
Sterility | non-sterile |
Frequency of use | single-use |
Note:
The blanks enable laboratories to manufacture customised one-piece abutments made of CoCr alloy on their own milling machines. For the milling process, the CAM CoCr blank, type ME is fixated with the front-facing groove of its cylindrical section via a milling holder for PreFace® abutments from Medentika®. These holders are available for selected machines from the respective machine manufacturer. The CAM CoCr blanks require product-specific CAM libraries. If you have any questions about compatibility, please contact DEDICAM® Technical Service at +49 7044 9445-800 or dedicam.cad@camlog.com. The corresponding iSy® Abutment screws (article code: P4005.1614) must be ordered separately. The associated CAD libraries are available as downloads from the Media Center on the Camlog® website.
The blanks enable laboratories to manufacture customised one-piece abutments made of CoCr alloy on their own milling machines. For the milling process, the CAM CoCr blank, type ME is fixated with the front-facing groove of its cylindrical section via a milling holder for PreFace® abutments from Medentika®. These holders are available for selected machines from the respective machine manufacturer. The CAM CoCr blanks require product-specific CAM libraries. If you have any questions about compatibility, please contact DEDICAM® Technical Service at +49 7044 9445-800 or dedicam.cad@camlog.com. The corresponding iSy® Abutment screws (article code: P4005.1614) must be ordered separately. The associated CAD libraries are available as downloads from the Media Center on the Camlog® website.